Electric pick
MP-1770
Opening the ground to replace imports
Mingpu 1770 Engineering Butter Pickaxe
Rated power: 1900 watts
Body weight: 17kg
Impact frequency: 1850bpm
Impact hammer force: 70J
1. Special 58mm cylinder, exhaust cylinder, no rear resistance.
2. Nine-toothed rotor increases the modulus gear 2.5 times, leading the blasting force.
3. Professional air duct design, fast heat dissipation, anti-burning machine.
4. Special two-way shock absorption design of stainless steel chuck, increase thickening lock rod, quality assurance.
5. Easy maintenance: only 6 screws are needed to replace the motor.
6. Luxurious configuration: imported bearings, imported carbon brushes, heightened connecting rods, heightened eccentric shafts, lengthened wires, convenient, efficient and durable.
Applicable to: mountain rock crushing, building demolition, bridge deck construction, soft and hard ground excavation and other operations.
Mingpu 1770 Engineering Butter Pickaxe
Rated power: 1900 watts
Body weight: 17kg
Impact frequency: 1850bpm
Impact hammer force: 70J
1. Special 58mm cylinder, exhaust cylinder, no rear resistance.
2. Nine-toothed rotor increases the modulus gear 2.5 times, leading the blasting force.
3. Professional air duct design, fast heat dissipation, anti-burning machine.
4. Special two-way shock absorption design of stainless steel chuck, increase thickening lock rod, quality assurance.
5. Easy maintenance: only 6 screws are needed to replace the motor.
6. Luxurious configuration: imported bearings, imported carbon brushes, heightened connecting rods, heightened eccentric shafts, lengthened wires, convenient, efficient and durable.
Applicable to: mountain rock crushing, building demolition, bridge deck construction, soft and hard ground excavation and other operations.
MP1770电镐配件清单(Φ58) | ||||||||
序号 | 名 称 | 数量 | 序号 | 名 称 | 数量 | 序号 | 名 称 | 数量 |
1 | 平垫Ø19×Ø32×2.5 | 1 | 35 | 轴承6204 LUV | 1 | 63 | 轴承6004NSK | 1 |
2 | 1660锁杆弹簧Ø27.5×Ø1.6x38.5 | 1 | 36 | 轴承6202RS CHL | 1 | 64 | 1770转子 | 1 |
3 | 圆柱销Ø4×30 | 1 | 37 | TE-DH50双联齿轮小端16齿/大端47齿 | 1 | 65 | 垫片φ18xφ12x1 | 1 |
4 | 1660锁套 淬火 | 1 | 38 | 轴承6202RS CHL | 1 | 66 | 轴承6201 RS CW | 1 |
5 | 1660减震环Ø18×Ø34×Ø8 | 2 | 39 | TE-DH50上盖密封圈 | 1 | 67 | 1770手柄座 | 1 |
6 | TE-DH50铁头 | 1 | 40 | TE-DH50铝机壳 | 1 | 68 | Ø6平垫 | 4 |
7 | 1660锁杆(止动杆) | 1 | 41 | 轴承6205RS SYBS | 1 | Ø6弹垫 | 4 | |
8 | 内六角螺丝M12×45(12.9) | 4 | 42 | TE-DH50偏心轴 | 1 | 内六角螺丝M6X20(8.8) | 4 | |
9 | 弹垫12(钢弹垫) 黑色 | 8 | 43 | 方键A型6x6x16 | 2 | 69 | TE-DH50电缆线护套 | 1 |
10 | 平垫13.7*24.2*2.5淬火 | 4 | 44 | O型圈φ90x1.9 | 1 | 70 | TE-DH12电缆线压板 | 1 |
11 | 0形圈Ø62×Ø2.4 | 2 | 45 | TE-DH50油盖座 | 1 | 71 | 自攻开槽螺丝4×16 | 2 |
12 | 氟胶圈Ø40×Ø33xØ3.5 | 3 | 46 | φ5平垫 | 4 | 72 | 电缆线2x1.0mm²*4m橡塑线 | 1 |
13 | TE-DH50冲击杆 | 1 | φ5弹垫 | 4 | 73 | 外六角螺丝M8×125(8.8淬火) | 1 | |
14 | 冲击杆垫片Ø54×Ø35xØ72x15 | 1 | 内六角螺丝M5X12(8.8) | 4 | 74 | 1660辅助手柄 | 1 | |
15 | TE-DH50缓冲圈Ø55×Ø72x16 | 1 | 47 | 羊毛绳(段) | 1 | 75 | 0845开关 | 1 |
16 | TE-DH50汽缸垫圈 | 1 | 48 | 1770下盖 | 1 | 76 | 1770手柄盖 | 1 |
17 | TE-DH50前筒 | 1 | 49 | Ø6平垫 | 2 | 77 | 自攻开槽螺丝4×16 | 5 |
18 | 内六角螺丝M10×40(12.9) | 4 | Ø6弹垫 | 2 | 78 | 调节旋钮保护盖 | 1 | |
19 | 0形圈Ø95×Ø2 | 1 | 内六角螺丝M6X20(12.9) | 2 | 60调节旋钮(含保护盖) | 1 | ||
20 | TE-DH50汽缸 | 1 | 50 | Ø6平垫 | 2 | 79 | 六角螺母M8 | 1 |
21 | TE-DH50汽缸后定位套 | 1 | Ø6弹垫 | 2 | 80 | 1660抱箍座 | 1 | |
22 | TE-DH50冲击活塞 | 1 | 内六角螺丝M6X30(12.9) | 2 | 81 | TE-DH50抱箍 | 1 | |
23 | 氟胶圈0形圈58.6*48.2*5.2 | 2 | 51 | φ6平垫 | 2 | 82 | 1660抱箍座 | 1 |
24 | TE-DH50活塞 | 1 | φ6弹垫 | 2 | ||||
25 | 活塞销12*57 | 1 | 内六角螺丝M6X35(12.9) | 2 | ||||
26 | TE-DH50铁连杆 | 1 | 52 | O型圈Φ20x2.65 | 1 | |||
27 | 滚针轴承NK16/16 | 1 | 53 | 0620油盖 | 1 | |||
28 | 内六角螺丝M6×20(12.9) | 6 | 54 | 十字螺丝5*75B型 | 2 | |||
Ø6弹垫 | 6 | 55 | 1660挡风圈 | 1 | ||||
Ø6平垫 | 6 | 56 | 1770定子 | 1 | ||||
29 | 0620油盖 | 1 | 57 | TE-DH50定子套 | 1 | |||
30 | O型圈内孔Φ20x2.65 | 1 | 58 | 1660盘簧 | 2 | |||
31 | 1770上盖 | 1 | 59 | 1660碳刷架(246#) | 2 | |||
32 | 轴用弹性挡圈φ18-A型 | 1 | 60 | 十字螺丝3*10(淬火/尖头) | 2 | |||
33 | TE-DH50大齿轮(34齿) | 1 | 61 | TE-DH50碳刷 进口材料 | 2 | |||
34 | 孔用弹性挡圈φ47-A型 | 1 | 62 | 十字带弹垫螺丝4*8(镀锌) | 2 |